3D Printing – Retraction Calibration
Are you suffering from stringing on your prints? If so, it could be that you need to run calibration on your extrusion distance, speed and possibly a temperature tower test. We'll cover this off in today's article.
3D Printing – Manual Bed Levelling
Having a level bed makes the difference between a good print and one that is fraught with issues. In this article I'll cover some of the basics with Bed Levelling and additional tips if you're using an Automatic Bed Levelling Touch Sensor.
3D Printing – 3D Touch
You want to add Automatic Bed Levelling to your 3D Printer? This article covers the basics of installing the hardware and compiling updated firmware and installing it to your printer.
3D Printing – Slicing Software and Tools
If you're new to 3D Printing then you need to know some of the Slicer tools available to you that help bring your prototypes and creations to life. I cover some of the tools I use which may be useful to you as you start your journey.
3D Printing – Blockages and Multi-Extruding Printers
Sooner or later, whatever your experience of 3D Printing, you'll need to deal with blockages, even more so with multi-extruder printers. In this article I cover off my experience of handling blockages and how I've managed them.
3D Printing – Bed and Adhesion
Bed Adhesion is one of the key issues with 3D Printing, in this article I look at some of the options and tricks you can use to help your prints stay when it matters most.
Where’s Lou?
Hello, the following is a true story which started life as a simple man mistake, I’d left the empty loo roll on top of the toilet of my bubble support […]
Bad Snowman 2020
Without getting bogged down in detail, I thought I'd share a recent 3D Print which has proven popular amongst friends this festive period. What do you think? A festive 2020 winner?
www.muckypaws.com 