The Joy of 3D Printing – What You Need to Know
Have you recently bought your first 3D Printer? I've provided a series of articles to try and help you get the best from your printer, from calibration to trouble shooting, please take a look and let me know your thoughts or if the articles helped you.
3D Printing – Retraction Calibration
Are you suffering from stringing on your prints? If so, it could be that you need to run calibration on your extrusion distance, speed and possibly a temperature tower test. We'll cover this off in today's article.
3D Printing – Manual Bed Levelling
Having a level bed makes the difference between a good print and one that is fraught with issues. In this article I'll cover some of the basics with Bed Levelling and additional tips if you're using an Automatic Bed Levelling Touch Sensor.
3D Printing – 3D Touch
You want to add Automatic Bed Levelling to your 3D Printer? This article covers the basics of installing the hardware and compiling updated firmware and installing it to your printer.
3D Printing – Bed and Adhesion
Bed Adhesion is one of the key issues with 3D Printing, in this article I look at some of the options and tricks you can use to help your prints stay when it matters most.
Where’s Lou?
Hello, the following is a true story which started life as a simple man mistake, I’d left the empty loo roll on top of the toilet of my bubble support […]
